3. Modified Flitch and Upgrade of Beam (Type C)

Step 1

Cut out slots to correct depth with chain mortiser or chainsaw. Vacuum clean all chases. Check for fissures and if necessary seal with TM3 mortar.

Step 2

Inject pre-calculated amount of thixotropic adhesive CB10TSS into the blind chases.

Step 3

Push F.R.P. or metallic plates into the adhesive using spacers where necessary.

Next Method >>

 

 

 

1. Modified Flitch and upgrade of Beams (TYPE A)

2. Compression and Tension zone Upgrading (TYPE B)

3. Improving Effective Span: Depth Ratio (TYPE C)

4. Tension Compression Zone Upgrading -- Top Access only (TYPE D)

5. Upgrading Glulam Beams (TYPE E)

6. Beam End Repair

7. Modified Tenon

8. King Post Truss

9. Repair/Restoration of Wall Plates

10. Repair to Beams or Joints Above Decorative Ceilings

11. Bonded-in Dowel Joints

12. Bonded-in Plate Joints