Principal Repair Methods currently used on in-situ repair/restoration
7. Modified Tenon
Mark out position with template Cut slot with drill stitching technique or chain mortiser Vacuum slots Cut and ‘dry’ fit plate -- Remove
Inject calculated volume of thixotropic adhesive
Fix plate one side
Fix second component and support joint Leave to cure
Next Methods >>
1. Modified Flitch and upgrade of Beams (TYPE A) 2. Compression and Tension zone Upgrading (TYPE B) 3. Improving Effective Span: Depth Ratio (TYPE C) 4. Tension Compression Zone Upgrading -- Top Access only (TYPE D) 5. Upgrading Glulam Beams (TYPE E) 6. Beam End Repair 7. Modified Tenon 8. King Post Truss 9. Repair/Restoration of Wall Plates 10. Repair to Beams or Joints Above Decorative Ceilings 11. Bonded-in Dowel Joints 12. Bonded-in Plate Joints
© 2008 Rotafix Ltd Rotafix, Aquachem, Rendacrete, Resiwood, Timberset, Vinachem and Zeroset are all registered trade marks of Rotafix Ltd.
