Code No |
Product |
Size |
Product
Description |
3250
|
HD12 SCREED
|
2.5Lt |
A 3-part mix. Use as a floor screed
or for the repair of damaged concrete floors. Recommended thickness
5mm+.
Data Sheet 
(PDF) COSHH
(PDF) |
3255 |
HD12 FAST SET SCREED |
2.5Lt |
As above but supplied as faster setting
grade.
Data Sheet
(PDF) COSHH
(PDF) |
| 3370 |
RM20 LW REPAIR MORTAR |
2.5Lt |
A 3-part mix. Lightweight repair mortar
for vertical and overhead repairs for concrete/masonry. May be
applied in a single application up to 40mm thick.
Data Sheet
(PDF) COSHH
(PDF) |
| 3377 |
RM20 BS6920 LW MORTAR |
2.5Lt |
As above but supplied as a faster
setting grade which is approved for potable water use.
Data Sheet
(PDF) COSHH
(PDF) |
| 3378 |
RM20 COLOURED LW MORTAR |
2.5Lt |
As 3370 and manufactured to client’s
colour specification.
Data Sheet
(PDF) COSHH
(PDF) |
| 3400 |
RENDACRETE LW |
c19.5 |
A pre-packed, pre-weighed powder that,
when mixed with the specified amount of water, produces a lightweight
high build repair product for concrete and masonry. May be applied
up to 40 mm thick in a single application.
Data Sheet
(PDF) COSHH
(PDF) |
| 3405 |
RENDACRETE HD IFS |
c12 |
A pre-packed, pre-weighed powder that,
when mixed with the specified amount of water, produces a flow
applied screed.
Data Sheet
(PDF) COSHH
(PDF) |
3540
3541 |
ZEROSET MORTAR
ZEROSET MORTAR |
2.5Lt
10Lt |
A 3-part low modulus epoxy mortar
system for use in critical environments, e.g., where vibration
and movement are beyond the capability of cementitious and polymer
mortars.
Data Sheet
(PDF) COSHH
(PDF) |
| 3451 |
STONE REPAIR PUTTY |
2.0Lt |
A 2-part epoxy mortar, providing a
surface finish which can be moulded to shape before cure and carved
after cure. This repair putty will not shrink or crack. Once cured
it can be shaped mechanically using tools.
Data Sheet
(PDF) COSHH
(PDF) |
| 3452 |
STONE REPAIR PUTTY BOX SET |
4X 2Lt |
All as above – but supplied in a box
set of 4 complete 2 litre packs.
Data Sheet
(PDF) COSHH
(PDF) |
| 3161 |
CEMBOND GROUT |
6.0Lt |
A high performance, non-shrink, thixotropic,
cement based grout, suitable for injection with a hand or power applicator. This cohesive grout
completely fills all voids into which it is injected. It rapidly develops its ultimate compressive strength. Suitable for bonding metal
components into masonry, concrete, brick and stone.
Data Sheet
(PDF) COSHH
(PDF) |
3201
3205 |
EP3 GROUT
EP3 GROUT |
2.5Lt
8.0Lt |
A 3-part high strength epoxy system
used for high performance
anchors and under bed plate grouting, particularly where
high dynamic loads are involved.
Data Sheet
(PDF) COSHH
(PDF) |
| 3470 |
SUPERFLUID GROUT |
c13.0 |
A pre-packed, pre-weighed powder that,
when mixed with the
specified amount of water, produces a non-shrink high-performance flowable grout for establishing firm foundations under machine beds.
Data Sheet
(PDF) COSHH
(PDF) |
| 3543 |
ZEROSET ANCHOR GROUT |
500cc |
This product is approved by Dept of Transport for parapet and street lighting anchors.It is a 2-part high strength liquid epoxy
system which is used for the fixing of metallic anchors where high performance is required, particularly effective in smooth and diamond drilled holes in reinforced concrete. Zeroset Anchor Grout will cure at 0 Deg C in a moisture filled hole without issue.
Data Sheet
(PDF) COSHH
(PDF) |
